aquapurehitech-australia.com –

Made in Germany – Quality without Compromise
For three decades, our supplier has stood for German engineering excellence in laboratory water treatment. All devices are developed, manufactured, and shipped worldwide in Hennigsdorf near Berlin. Regular testing of our raw materials and development processes ensures consistently high product quality. This increases reliability and service life while reducing maintenance requirements. For users, this means a long-term reduction in operating costs.

Did you know? Products manufactured in Germany achieve an average service life that is up to 35% longer.

Designed for the production of pure water out of tap water

• The series of AquaRO², AquaRO²DI and EDI² are based on a reverse osmosis (RO) unit to produce deionised water. 
• The EDI² series further processes the osmosis water by using an EDI cell to get Type II water. All sytems provide you with reliable and compact systems at low operating costs. 
• The advantages of both series is the flexibility in terms of configuration. A production rate of 8 to 40 L/h in three different degrees of pure water (10 µS/cm to 0.2 µS/cm) is available. Optionally the systems can be equipped with a dispenser. 
• The customer can select a 35 L, 70 L or individual tank size.

Main technical specifications of the system​

• Resistivity/Conductivity
• > 0.1 MOhm x cm to > 5 MOhm x cm
• < 10 µS/cm to < 0.2 µS/cm

• Production rate
• 8 L/h to 40 l/h

• Total Organic Carbon (TOC)
• < 20 ppb to 50 ppb

KEY FEATURES

• Large 10″ colour touchscreen for easy navigation of menus and wizards
• High performance water system built into durable control cabinet
• Large capacity production (up to 450 L/h) of Type II ultrapure water (<1 μS/cm)

The HA-RO complete EDI system is capable of producing 70 – 500 L/h of pure water (5 – 15 μS/cm) through the RO stage, which then undergoes an EDI stage of treatment to produce 50 – 450 L/h of Type II ultrapure water (<1 μS/cm).

The HA-RO complete EDI is a high-quality VE water treatment system in a completely closed, low-noise cabinet design. The reverse osmosis EDI method ensures water qualities according to ASTM Type II and Type III as well as DIN EN 285 and DIN ISO 15883. The pure water quality is below 1 µS/cm. The vibration-damped system control cabinet with a central control unit (10″ touch display) enables intuitive operation of the system with a minimum noise level.

The measured values ​​are processed completely via the SPS, so that separate field regulation and control devices for level, conductivity, temperature, pressure and UV intensity are no longer required are. Another highlight is the high-quality pump station for ring mains. Due to the space-saving construction and the sophisticated design, this compact system can be integrated into any laboratory environment.

The HA-RO of pure water systems are manufactured in Germany and globally recognised as proven technology for producing laboratory grade water, for over 30 years. 

ADDITIONAL FEATURES

• Ready-to-connect deionised water treatment system – plug & treat
• Fully equipped cabinet system
• Compact, high-quality deionised water treatment as an EDI system
• Completely closed, low-noise cabinet system
• Visualisation, operation and dilution via PLC with 10″ touchscreen panel
• All necessary pre-treatment and post-treatment components integrated
• Connection and integration to control technologies possible
• Electrical and control expansion up to complete building supply with deionised water
• Measured value processing completely via PLC
• All measuring points can be calibrated and adjusted
• All conductivity displays are temperature-compensated
• Horizontal non-wearing stainless steel inline high-pressure pump
• High-quality electrical and hydraulic brand components

APPLICATIONS

• Suitable for a range of research, medical and laboratory related applications, where relatively large volumes (up to 450 L/h) of high specification (<1 μS/cm) water is required.
• The compact cabinet design enables the HA-RO complete EDI system to be installed in a range of environments including inside medical and/or laboratory settings.
• The HA-RO complete EDI is also suitable for use as the pre-treatment options (by producing Type II UPW) for the membraPure OptiLab and OptiPrep ultrapure water systems (Type I UPW), also supplied by us.

KEY FEATURES

• Large 10″ colour touchscreen for easy navigation of menus and wizards
• High performance water system built into durable control cabinet
• Large capacity production (up to 450 L/h) of Type II ultrapure water (<1 μS/cm)

The HA-RO complete EDI system is capable of producing 70 – 500 L/h of pure water (5 – 15 μS/cm) through the RO stage, which then undergoes an EDI stage of treatment to produce 50 – 450 L/h of Type II ultrapure water (<1 μS/cm).

The HA-RO complete EDI is a high-quality VE water treatment system in a completely closed, low-noise cabinet design. The reverse osmosis EDI method ensures water qualities according to ASTM Type II and Type III as well as DIN EN 285 and DIN ISO 15883. The pure water quality is below 1 µS/cm. The vibration-damped system control cabinet with a central control unit (10″ touch display) enables intuitive operation of the system with a minimum noise level.

The measured values ​​are processed completely via the SPS, so that separate field regulation and control devices for level, conductivity, temperature, pressure and UV intensity are no longer required are. Another highlight is the high-quality pump station for ring mains. Due to the space-saving construction and the sophisticated design, this compact system can be integrated into any laboratory environment.

The HA-RO of pure water systems are manufactured in Germany and globally recognised as proven technology for producing laboratory grade water, for over 30 years. 

ADDITIONAL FEATURES

• Ready-to-connect deionised water treatment system – plug & treat
• Fully equipped cabinet system
• Compact, high-quality deionised water treatment as an EDI system
• Completely closed, low-noise cabinet system
• Visualisation, operation and dilution via PLC with 10″ touchscreen panel
• All necessary pre-treatment and post-treatment components integrated
• Connection and integration to control technologies possible
• Electrical and control expansion up to complete building supply with deionised water
• Measured value processing completely via PLC
• All measuring points can be calibrated and adjusted
• All conductivity displays are temperature-compensated
• Horizontal non-wearing stainless steel inline high-pressure pump
• High-quality electrical and hydraulic brand components

APPLICATIONS

• Suitable for a range of research, medical and laboratory related applications, where relatively large volumes (up to 450 L/h) of high specification (<1 μS/cm) water is required.
• The compact cabinet design enables the HA-RO complete EDI system to be installed in a range of environments including inside medical and/or laboratory settings.
• The HA-RO complete EDI is also suitable for use as the pre-treatment options (by producing Type II UPW) for the membraPure OptiLab and OptiPrep ultrapure water systems (Type I UPW), also supplied by us.